Overview
Two table-saw configurations for woodworking
Compare VEVOR’s compact table saw and table saw with stand. Both use a 10-inch, 40-tooth blade and a 15-amp motor, while their no-load speeds, dimensions and weights differ. Use the exact SKU and model to identify the configuration.
Compare models
| SKU and model | Configuration | Dimensions and product weight |
|---|---|---|
| ZLXMGTJWZJMC19JOUV1 M1H-ZP7-254-1 |
Compact table saw 4500 RPM no-load speed |
65 × 61.2 × 30 cm 19.2 kg / 42.3 lb |
| ZLXMGTJYZJMC2VQLNV1 M1H-ZP5-254D-1 |
Table saw with stand 5000 RPM no-load speed |
129 × 57.6 × 104.9 cm 27.5 kg / 60.6 lb |
Shared specifications
- Electrical rating: 120 V, 60 Hz; 1800 W / 15 A
- Blade outside diameter: 254 mm / 10 inches; 40 teeth
- Listed maximum cutting depth: 85 mm at 90°; 55 mm at 45°
- Blade bevel adjustment: up to 45°
- Miter gauge range: −60° to +60°
- Height-adjustable blade and rip fence with measuring guide rail
- Blade guard assembly and dust-collection port described by the manufacturer
The miter gauge range describes the workpiece-angle setting. It is separate from the blade’s 45° bevel adjustment.
Compact table saw · M1H-ZP7-254-1
SKU: ZLXMGTJWZJMC19JOUV1
The compact M1H-ZP7-254-1 pairs a 15-amp motor with a 4500 RPM no-load speed. Its rip fence, measuring guide rail and adjustable blade height support different woodworking setups. The listed machine dimensions are 65 × 61.2 × 30 cm.





Table saw with stand · M1H-ZP5-254D-1
SKU: ZLXMGTJYZJMC2VQLNV1
The M1H-ZP5-254D-1 includes a stand and has a 5000 RPM no-load speed. It uses a 15-amp motor with an adjustable rip fence and blade height. Its listed overall dimensions are 129 × 57.6 × 104.9 cm.





Configuration details
- ZLXMGTJWZJMC19JOUV1: Table saw with a 10-inch, 40-tooth blade and sliding miter gauge, as identified in the official product information.
- ZLXMGTJYZJMC2VQLNV1: Table saw with stand, a 10-inch, 40-tooth blade and sliding miter gauge, as identified in the official product information.
Questions before ordering
Which model includes a stand?
The M1H-ZP5-254D-1, SKU ZLXMGTJYZJMC2VQLNV1, is the table-saw-with-stand configuration.
Are the two motor speeds the same?
No. The compact M1H-ZP7-254-1 is listed at 4500 RPM, while the M1H-ZP5-254D-1 is listed at 5000 RPM. These are no-load speeds.
Do the selector labels confirm rip capacity?
The existing selector labels and manufacturer dimensional information differ. A confirmed rip-capacity figure is not provided here. Check the exact SKU and model with customer support before ordering for a specific cutting width.
Is the miter gauge range the blade bevel range?
No. The listed miter gauge range is −60° to +60°. The blade bevel adjustment is up to 45°.
Can I choose a replacement blade from the 10-inch label alone?
No. Check the selected model’s manual for the required bore, blade specifications and permitted accessories before fitting a replacement.
What should I check before using the saw?
Read the selected model’s instructions, install and use the specified guards, and follow its setup, workpiece-support and operating requirements.
Shipping, returns and support
Shipping policy · Return and refund policy · Customer support
Specifications
Review the product description for the specifications supplied for this item. Check the selected configuration and contact us if a specification is unclear.
What’s Included
Refer to the product description for confirmed package contents. If a complete list is not provided, contact us before ordering; items shown in lifestyle images are not automatically included.
Shipping & Returns
Free standard shipping on eligible US orders. Availability and charges depend on the item and delivery address. Shipping policy
Eligible items may be returned within 30 days of delivery. See return conditions. Return conditions
Orders are usually processed within 48 hours, excluding weekends and holidays. Processing may take longer during busy periods. Delivery is approximately 8 business days after dispatch.
Questions about your order? vervegrow@gmail.com
