Overview
Shallow-well pumps for clean-water transfer
Choose the 1.5 HP or 1.1 HP manual pump, or the 1 HP model with an automatic controller. These 115 V / 60 Hz pumps have stainless-steel pump heads and cast-aluminum housings for garden irrigation and water transfer. Select by the exact configuration, suction height and connection requirements.
Clean water only. The manual 1.5 HP and 1.1 HP models are expressly unsuitable for drinking water. Potable-water suitability is not established for the automatic configuration.
1.5 HP manual — XKJ-1105S


| Model | XKJ-1105S |
|---|---|
| Material | Stainless Steel + Cast Aluminum |
| Handle Material | Iron |
| Power | 1.5HP/1100W |
| Voltage | 115V/60Hz |
| Max Flow Rate | 1200 GPH (4.5 m³/h) |
| Max Head Lift | 164 ft/50 m |
| Max Suction Height | 26.2 ft/8 m |
| Max Pressure | 87 psi/6 bar |
| Current | 10A |
| Max Speed | 3450 RPM |
| Inlet/Outlet Diameter | NPT 1"/2.5 cm |
| Ingress rating (manufacturer specification) | IPX4 |
| Insulation Class | F |
| Max Liquid Temp | 95℉/35℃ |
| Cable Length | 6.6 ft/2 m |
| Product Size (L x W x H) | 15 x 9.4 x 9.8 in/38 x 24 x 24.8 cm |
| Product net weight | 24.7 lbs/11.2 kg |
Included: the selected manual pump and two garden-hose adapters. The pump uses 1-inch NPT suction and discharge connections.
1.5 HP manual pump: preparation and water connections
Fill the pump head before operation. The inlet diagrams show a tap-fed connection and a suction-line arrangement; self-priming does not mean starting with an empty pump head. Use clean, non-drinking water only.


Inlet arrangement and storage
Avoid excessive bends in the suction line and keep its inlet end fully submerged. Drain the remaining water when the pump will be left unused for an extended period. The drainage illustration is not a claim that this pump can handle wastewater.


Garden and farm applications
This manual configuration is intended for lawn sprinkling, garden watering and farm irrigation with clean water. Delivery depends on the required head and the connected pipework; the maximum ratings are not a simultaneous operating point.



Carrying and connecting the pump
The iron carry handle supports moving the pump between suitable installation points. Two garden-hose adapters are included for its 1-inch NPT suction and discharge connections. The motor has a covered manual on/off switch; this version does not include the automatic controller.



1.1 HP manual — XKJ-805S-1

| Model | XKJ-805S-1 |
|---|---|
| Material | Stainless Steel + Cast Aluminum |
| Handle Material | Iron |
| Power | 1.1HP/800W |
| Voltage | 115V/60Hz |
| Max Flow Rate | 978 GPH (3.7 m³/h) |
| Max Head Lift | 131 ft/40 m |
| Max Suction Height | 23 ft/7 m |
| Max Pressure | 69.6 psi/4.8 bar |
| Current | 7A |
| Max Speed | 3450 RPM |
| Inlet/Outlet Diameter | NPT 1"/2.5 cm |
| Ingress rating (manufacturer specification) | IPX4 |
| Insulation Class | F |
| Max Liquid Temp | 95℉/35℃ |
| Cable Length | 6.6 ft/2 m |
| Product Size (L x W x H) | 12.7 x 9.4 x 9.8 in/32.2 x 24 x 25 cm |
| Product net weight | 15.9 lbs/7.2 kg |
Included: the selected manual pump and two garden-hose adapters. The pump uses 1-inch NPT suction and discharge connections.
1.1 HP manual pump: preparation and water connections
Fill the pump head before operation. The inlet diagrams show a tap-fed connection and a suction-line arrangement; self-priming does not mean starting with an empty pump head. Use clean, non-drinking water only.


Inlet arrangement and storage
Avoid excessive bends in the suction line and keep its inlet end fully submerged. Drain the remaining water when the pump will be left unused for an extended period. The drainage illustration is not a claim that this pump can handle wastewater.


Garden and farm applications
This manual configuration is intended for lawn sprinkling, garden watering and farm irrigation with clean water. Delivery depends on the required head and the connected pipework; the maximum ratings are not a simultaneous operating point.



Carrying and connecting the pump
The iron carry handle supports moving the pump between suitable installation points. Two garden-hose adapters are included for its 1-inch NPT suction and discharge connections. The motor has a covered manual on/off switch; this version does not include the automatic controller.


1 HP automatic — XKJ-1104SE

| Model | XKJ-1104SE |
|---|---|
| Material | Stainless Steel + Cast Aluminum |
| Power | 1HP |
| Voltage | 115V/60Hz |
| Max Head Lift | 145 ft |
| Max Suction Height | 26.2 ft/8 m |
| Max Pressure | 87 psi/6 bar |
| Current | 10A |
| Max Speed | 3450 RPM |
| Inlet/Outlet Diameter | NPT 1"/2.5 cm |
| Ingress rating (manufacturer specification) | IPX4 |
| Insulation Class | F |
| Max Liquid Temp | 95℉/35℃ |
| Cable Length | 6 ft |
| Product Size (L x W x H) | 15 x 9.4 x 15.9 in/38 x 24 x 40.5 cm |
| Product net weight | 25.8 lbs/11.7 kg |
This configuration includes an electronic controller for automatic operation. Confirm the installation and connection requirements for your system.
Automatic controller and water connections
The XKJ-1104SE configuration includes an electronic controller for automatic operation and manufacturer-described dry-running protection. Fill the pump head before first operation and follow the model installation instructions. The controller does not remove the need to verify pipework and other installation requirements.

Inlet arrangement and drainage
Keep the suction line free of excessive bends and the inlet end submerged. Drain residual water before extended non-use. Use only clean water; the drainage diagram does not establish wastewater suitability.


Watering applications
The automatic configuration can be used for lawn sprinkling, garden watering and farm irrigation, subject to its installation requirements. Potable-water suitability is not established.



Pump head, handle and switch
The stainless-steel pump head, portable handle and covered switch are shown below. The manufacturer lists thermal and overload protection; keep the pump above water and follow its electrical and priming instructions.



Installation and selection
- Fill the pump head with water before operation. Follow the exact model manual for priming and installation.
- Use only clean water within the listed 35°C / 95°F limit.
- Maximum flow and maximum head are separate limiting ratings; actual delivery depends on the installation.
- IPX4 describes splash resistance. It does not make the pump suitable for immersion.
- Match the 115 V / 60 Hz electrical supply and 1-inch NPT connections. Do not select a pump by horsepower alone.
Questions before ordering
Which versions have automatic control?
The 1 HP XKJ-1104SE configuration has an electronic controller. The 1.5 HP and 1.1 HP configurations are the manual options.
Can the pump start with an empty pump head?
Fill the pump head with water before operation, following the model instructions.
Can it pump drinking water?
The manual 1.5 HP and 1.1 HP versions are listed for clean, non-drinking water. Potable-water suitability is not established for the automatic version.
Does maximum flow apply at maximum lift?
No. These are separate maximum ratings. Check the required flow at the actual installation head.
Is the product net weight a shipping weight?
No. The table identifies product net weight; it must not be treated as the packaged shipping weight.
Delivery, returns and help
Read our shipping policy, return policy and Contact / Help for current order information.
Specifications
Review the product description for the specifications supplied for this item. Check the selected configuration and contact us if a specification is unclear.
What’s Included
Refer to the product description for confirmed package contents. If a complete list is not provided, contact us before ordering; items shown in lifestyle images are not automatically included.
Shipping & Returns
Free standard shipping on eligible US orders. Availability and charges depend on the item and delivery address. Shipping policy
Eligible items may be returned within 30 days of delivery. See return conditions. Return conditions
Orders are usually processed within 48 hours, excluding weekends and holidays. Processing may take longer during busy periods. Delivery is approximately 8 business days after dispatch.
Questions about your order? vervegrow@gmail.com
