Overview
Choose your hydraulic knockout kit
Compare three VEVOR hydraulic punch configurations for making conduit-fitting openings in suitable sheet materials. Choose a 10-ton kit with six nominal conduit sizes or a 15-ton kit with ten sizes. The two 10-ton models have different die designs and listed weights, so match the exact SKU to your application.
Nominal conduit sizes identify the fitting size. Check the die chart for actual hole diameters, and confirm material grade and thickness before ordering.
Features shared by these three kits
- Hose-connected hydraulic ram: each SKU lists a 29.5 in / 75 cm hose.
- Pressure-release control: an on/off knob releases hydraulic pressure after punching.
- Alignment markings: laser-engraved marks help position the dies.
- Steel components: the manufacturer describes 40Cr and 45# steel construction.
- Storage case: each configuration includes a carrying case for its tooling.
Compare the exact configurations
| SKU | Model | Hydraulic force | Punch/die sizes | Nominal conduit range | Die design | Listed item weight |
|---|---|---|---|---|---|---|
| S10T240CR16MM3UYFV0 | SYK-8B | 10 ton | 6 sizes | 1/2–2 in | Deep-draw dies | 22 lb / 10 kg |
| SD10T240CR2MMKGY6V0 | SYK-8B-1 | 10 ton | 6 sizes | 1/2–2 in | Slug-splitting dies | 19.8 lb / 9 kg |
| SD15T240CR2MM8SYBV0 | SYK-15-10 | 15 ton | 10 sizes | 1/2–4 in | Slug-splitting dies | 50.7 lb / 23 kg |
Each row describes only the named SKU. A higher force rating or a matching thread label does not establish compatibility with another model’s dies.
SYK-8B: 10 ton, 6 conduit sizes
SKU: S10T240CR16MM3UYFV0
The manufacturer describes an optimized deep-draw die profile. Laser-engraved alignment marks help locate the punch on the workpiece.





| Model-specific detail | Specification |
|---|---|
| Model | SYK-8B |
| Nominal conduit fitting sizes | 1/2 in, 3/4 in, 1 in, 1-1/4 in, 1-1/2 in, 2 in |
| Hydraulic force | 10 ton |
| Punch/die size count | 6 |
| Listed item weight | 22 lb / 10 kg |
| Case dimensions | 16.5 × 6.1 × 12.4 in / 42 × 15.5 × 31.5 cm |
SYK-8B-1: 10 ton, 6 conduit sizes
SKU: SD10T240CR2MMKGY6V0
This model is described with slug-splitting dies for removal of the punched slug, plus laser-engraved alignment marks.


| Model-specific detail | Specification |
|---|---|
| Model | SYK-8B-1 |
| Nominal conduit fitting sizes | 1/2 in, 3/4 in, 1 in, 1-1/4 in, 1-1/2 in, 2 in |
| Hydraulic force | 10 ton |
| Punch/die size count | 6 |
| Listed item weight | 19.8 lb / 9 kg |
| Case dimensions | 16.5 × 6.1 × 12.4 in / 42 × 15.5 × 31.5 cm |
SYK-15-10: 15 ton, 10 conduit sizes
SKU: SD15T240CR2MM8SYBV0
The 15-ton model adds four larger nominal conduit sizes to the six-size range and uses slug-splitting dies with laser-engraved alignment marks.


| Model-specific detail | Specification |
|---|---|
| Model | SYK-15-10 |
| Nominal conduit fitting sizes | 1/2 in, 3/4 in, 1 in, 1-1/4 in, 1-1/2 in, 2 in, 2-1/2 in, 3 in, 3-1/2 in, 4 in |
| Hydraulic force | 15 ton |
| Punch/die size count | 10 |
| Listed item weight | 50.7 lb / 23 kg |
| Case dimensions | 21.6 × 6.7 × 11.8 in / 55 × 17 × 30 cm |
Shared measurements and connections
| Specification | Value for each of the three listed SKUs |
|---|---|
| Hose length | 29.5 in / 75 cm |
| Draw-stud thread specifications | M20×1.5 and M10×1 |
| Construction | Steel; manufacturer describes 40Cr and 45# components |
Use the exact model when checking replacement parts or accessories.
Package contents by SKU
The following contents are stated in each SKU’s manufacturer feature list. The six- or ten-size count refers to the conduit punch/die range, not the total number of pieces in the case.
SYK-8B · S10T240CR16MM3UYFV0
- Hydraulic punch assembly
- 6 matching punch-and-die sizes
- 1 step drill bit
- 1 carrying case
- 2 draw studs
- 1 piston shaft
- 1 spacer
- Sealing rings
SYK-8B-1 · SD10T240CR2MMKGY6V0
- Hydraulic punch assembly
- 6 matching punch-and-die sizes
- 1 step drill bit
- 1 carrying case
- 2 draw studs
- 1 piston shaft
- 1 spacer
- Sealing rings
SYK-15-10 · SD15T240CR2MM8SYBV0
- Hydraulic punch assembly
- 10 matching punch-and-die sizes
- 1 step drill bit
- 1 carrying case
- 2 draw studs
- 1 piston shaft
- 1 spacer
- Sealing rings
The number of sealing rings is not specified. Contact customer support using the exact SKU if a particular replacement part or accessory is required.
Material and fitting checks
- Confirm the exact material, grade, thickness and required finished-hole diameter before choosing a kit. Selection labels alone should not be used as operating limits.
- Review the model’s instructions for pilot-hole preparation, draw-stud selection and the correct punch/die pairing.
- Use the supplied tooling or manufacturer-confirmed compatible replacements. Do not infer cross-brand compatibility from the nominal size or thread alone.
- Follow the product instructions for setup, workpiece support, pressure release and maintenance.
Frequently asked questions
What is different between the two 10-ton options?
SYK-8B is described with deep-draw dies and a listed weight of 22 lb. SYK-8B-1 uses slug-splitting dies and has a listed weight of 19.8 lb. Both list six nominal conduit fitting sizes from 1/2 to 2 in.
What does the 15-ton kit add?
SYK-15-10 has ten nominal conduit sizes through 4 in. In addition to the six sizes in the 10-ton range, it includes 2-1/2, 3, 3-1/2 and 4 in sizes.
Does a 1/2 in conduit die make a 1/2 in hole?
The listed sizes refer to nominal conduit fittings. Consult the die chart for the actual finished-hole diameter required by your fitting.
Is a step drill included?
Yes. Each of the three manufacturer feature lists includes one step drill bit, separate from the punch-and-die sizes.
Can I use dies from another brand?
Do not assume cross-brand interchangeability. Confirm the exact die, draw stud and hydraulic head combination with the manufacturer before ordering replacements.
How do I choose for stainless steel?
Give customer support the exact SKU, material grade, sheet thickness and desired conduit size so the application can be checked. Use the model instructions for operating limits.
Shipping, returns and support
Review the shipping policy for delivery terms and the refund policy for return conditions. Contact customer support with the exact SKU for application or accessory questions.
Specifications
Review the product description for the specifications supplied for this item. Check the selected configuration and contact us if a specification is unclear.
What’s Included
Refer to the product description for confirmed package contents. If a complete list is not provided, contact us before ordering; items shown in lifestyle images are not automatically included.
Shipping & Returns
Free standard shipping on eligible US orders. Availability and charges depend on the item and delivery address. Shipping policy
Eligible items may be returned within 30 days of delivery. See return conditions. Return conditions
Orders are usually processed within 48 hours, excluding weekends and holidays. Processing may take longer during busy periods. Delivery is approximately 8 business days after dispatch.
Questions about your order? vervegrow@gmail.com
