VEVOR #8 vs #12 Meat Grinder: Batch Size, Plates & Counter Fit

Choose the VEVOR #8 if you grind occasional batches or need to put the machine away after each use. Choose the #12 if you regularly work through larger batches and can leave a heavier grinder on the counter. Both come with 6 mm and 8 mm plates; the main differences are rated speed, size and weight.
VEVOR #8 vs #12 at a glance
| What to check | #8 | #12 |
|---|---|---|
| Dekuch option | 8-300LB/h | 12-420LB/h |
| Rated grinding speed | 5 lb/min (300 lb/h equivalent) | 7 lb/min (420 lb/h equivalent) |
| Rated motor | 600 W | 850 W |
| Listed continuous working time | 30 min | 30 min |
| Listed size (W × D × H) | 11.22 × 7.09 × 14.37 in | 14.37 × 8.46 × 16.54 in |
| Listed net weight | 20.5 lb | 34.83 lb |
| Included grinding plates | 6 mm and 8 mm | 6 mm and 8 mm |
The hourly labels convert the rated per-minute figures to a common unit. VEVOR lists a 30-minute continuous working time for both models. Follow the manual for operating intervals; real batch time also includes prep, feeding and cleanup.
Choose by the batch you make most often
For a 10 lb batch, dividing by the rated speeds gives about 2 minutes for the #8 and 1 minute 26 seconds for the #12. For 40 lb, the same calculation gives about 8 minutes versus 5 minutes 43 seconds. These examples only illustrate the rated-speed difference. If grinding is a small part of your process, the easier machine to move and store may save more effort. If you feed prepared batches repeatedly, the #12's extra capacity has more time to matter.

Measure counter and storage space
The #12 is about 3.15 inches wider and 2.17 inches taller than the #8. Measure with the feed tray in place, then allow room above it for the pusher and in front of the head for a bowl. If you plan to move the grinder between a cupboard and the worktop, check the shelf depth and whether you can comfortably lift the listed weight.

Check the plates and the parts you will replace
Both include a 6 mm and an 8 mm plate, so you can choose the smaller or larger opening on either model. VEVOR shows an 18 mm stuffing tube for the #8 and a 20 mm tube for the #12. If you already own plates, blades or tubes, confirm their fit against the exact model and part dimensions before buying. The hole size on a plate tells you about the grind, not whether it fits the head.

Frequently asked questions
Does #12 mean a 12 mm grinding plate?
No. It identifies the grinder head size. This #12 comes with 6 mm and 8 mm plates.
Will the #12 grind a batch 40% faster?
Its rated throughput is 40% higher (7 versus 5 lb/min). At those rates, the same batch takes about 29% less grinding time. Total prep time depends on your process.
Which option should I select on Dekuch?
Select 8-300LB/h for model #8, SKU SYTMDDJRJSYSF86UJ001V1, or 12-420LB/h for model #12, SKU SYTMDDJRJSYS3PBIU001V1. The 500 lb/h option on the same page is a separate configuration.
Compare current options
See the VEVOR electric meat grinders at Dekuch for current availability. Browse the VEVOR Buying Guides hub for other equipment comparisons.
Manufacturer specifications: VEVOR #8 and VEVOR #12. Dimensions and net weights are listed by SKU on the Dekuch product page.