Ready-to-Tile Shower Bench Guide: Base Size & Finished Fit

VEVOR gray rectangular ready-to-tile shower bench, 38.2-inch model

A ready-to-tile bench belongs in the planning stage of a shower renovation. Start with the space the base will occupy, then allow for the finish and the surrounding shower layout. This guide covers one exact VEVOR option: SKU FSLY115X38X20Y2XKV0. The other size options on the product page have separate specifications.

Match the option to the detailed dimensions

Manufacturer-listed specifications for this SKU
Model VV-FSLYD-Z38.2
Dekuch size-option label 11.5 x 38 x 20 in
Listed base dimensions 38.2 x 11.4 x 20 in / 97 x 29 x 50 cm
Material EPS composite
Net product weight 9.3 lb / 4.2 kg
Manufacturer-listed load capacity 440 lb / 200 kg; follow the complete installation instructions
Listed package One tile shower bench

The selector label is an option identifier. Use the detailed base dimensions when discussing fit with your installer. Neither the label nor the base dimensions establishes the final tiled size. The finished surface depends on your project's materials and assembly.

Compare your layout before buying

Mark the proposed bench footprint on your plan. Check the entry route, the space in front of the seat, and access to controls. A rectangle that fits against a wall on paper may still crowd the usable shower area. Include the planned finish when checking clearances; do not order a base equal to a tight finished opening without reviewing that detail.

For storage, compare the items you actually intend to place on the seat with the usable finished surface. For seating, discuss the finished height and depth with the person who will use it and the installer. A product dimension alone does not establish comfortable or accessible seating for every user.

Manufacturer view of the exact VEVOR ready-to-tile bench SKU

Plan the installation as a complete assembly

This is a tile-ready base, not a finished freestanding shower chair. VEVOR describes securing the bench and continuing the tiling work. Confirm the substrate, joints, compatible setting materials and waterproofing details for your entire shower system before work begins. A waterproof layer on a component does not by itself confirm the performance of every connection in the finished installation.

VEVOR describes side-to-side trimming to reduce this model's size. Treat cutting as a project decision: confirm the permitted modification and how the finished assembly will be completed before cutting. If the fit depends on a precise reduction, obtain the exact model instructions first.

VEVOR supplier illustration for the selected shower bench

What the weight figures tell you

The net weight is the bench's product weight, not the packed shipping weight. The stated load capacity is a manufacturer specification, not a Dekuch load test. Do not transfer it to another size or use it to infer a rating for an unfinished or incorrectly installed assembly.

VEVOR detail image for SKU FSLY115X38X20Y2XKV0

Frequently asked questions

Does this option arrive tiled?

No. Plan the finish and installation materials as part of the shower project.

Why does the option say 11.5 x 38 x 20 inches?

That selector belongs to the SKU in this guide. Its detailed specification lists 38.2 x 11.4 x 20 inches. Match the SKU rather than assuming the two labels are independent products.

Do these specifications apply to the 48-inch option?

No. Verify that option's own SKU and instructions before comparing it.

Are tools, tile and setting materials included?

The supplier's package list identifies one bench. Confirm any other materials required for your project separately.

Check the exact option

Open the 11.5 x 38 x 20 in selector for SKU FSLY115X38X20Y2XKV0, compare the current shower bench options at Dekuch, or browse the VEVOR Buying Guides hub.

Specification source: VEVOR VV-FSLYD-Z38.2 / FSLY115X38X20Y2XKV0. Supplier images illustrate the product and possible use; surrounding fixtures and installation materials are not a package-content list.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.