9–15 vs 15–22 kg Spring Balancer: Load Range & Fit

Choose a spring balancer by its full load range, then check the intended travel and mounting arrangement. Dekuch offers two VEVOR options: 9–15 kg and 15–22 kg. The lower number matters as well as the upper one; a higher maximum does not establish that the unit is appropriate for a lighter tool.
Start by identifying the complete load you intend to suspend and ask the supplier to confirm suitability for that configuration. This comparison explains the listings; it does not replace the model's installation, adjustment or inspection instructions.
9–15 kg vs 15–22 kg: compare the exact selections
| Selection check | 9–15 kg | 15–22 kg |
|---|---|---|
| SKU | DHPHQ9-15KGHS0001V0 | DHPHQ15-22KGHS001V0 |
| Supplier-listed load range | 9 to 15 kg | 15 to 22 kg |
| Listed length | 1.5 m | 1.5 m |
| Listed unit weight | 5.5 kg | 8.3 kg |
| Material / adjustment | Steel; adjustable tension | Steel; adjustable tension |
| Dekuch availability at review | In stock | Out of stock |
Reviewed October 29, 2026. Measurements are supplier listings, not independent tests. The supplier calls the 1.5 m figure “spring length”; verify usable cable travel and end positions for your layout. Stock and price can change—check the selected option.
Read the minimum and maximum together
Treat each pair as an operating-range label, rather than as a single maximum rating. For example, a measured 12 kg configuration lies within the lower option's published interval; a 19 kg configuration lies within the higher interval. These arithmetic comparisons are a starting point, not installation approval. Actual suitability still depends on the complete configuration and the manufacturer's requirements.

If the load is close to a boundary, changes during work, or includes attachments you have not weighed, resolve that uncertainty before ordering. At the shared 15 kg boundary, both listings show that number, but the page alone does not establish which model is preferable. Ask for a recommendation based on the actual load and work cycle instead of choosing by price.
Measure the movement you need
Write down the intended upper and lower tool positions, the available space, and where the housing would sit. Compare that sketch with the exact model's dimensional and travel information. A length figure alone does not tell you whether the hook can reach every desired position without interference.

Also separate the suspended tool's weight from the balancer's own weight. They are different figures in the table. Have the mounting arrangement assessed for the actual installation and loads; the product description does not establish the capacity of your beam, bracket or fasteners.
Confirm the hardware and instructions
Both supplier pages describe a wire rope, hook and tension adjustment. Those features do not establish fall-arrest certification, suitability for lifting people, or replacement of a rated lifting hoist. This guide makes none of those claims.

Before purchase, request the current manual and verify the supplied attachments, mounting requirements, adjustment procedure and inspection requirements. Do not infer a procedure from a marketing photograph. If the listing and received label differ, resolve the discrepancy before putting the unit into service.
Five checks before checkout
- Load: record the complete suspended configuration, including attachments.
- Range: check both limits against the exact SKU.
- Travel: confirm usable movement and clearance for your layout.
- Mounting: confirm the required support and supplied hardware with the relevant instructions.
- Availability: select the right variant and verify current stock.
View 9–15 kg spring balancer →
Check availability: 15–22 kg spring balancer →
Frequently asked questions
Is the higher-capacity option always the better choice?
No. Compare the entire published interval and confirm suitability for your load. Maximum capacity alone is not enough.
Does 1.5 m mean a 1.5 m installation height?
The supplier's length label does not define your installation geometry. Confirm the required positions and usable travel for the specific model.
Are the two options the same SKU?
No. Use the SKU row in the comparison to identify the ordered range.
Can this page tell me how to set the spring tension?
No. Follow the current model instructions and obtain qualified assistance where needed. This buying guide does not provide an adjustment procedure.
Plan the rest of your workspace
Workbench size guide · All VEVOR buying guides
Specification references: VEVOR 9–15 kg SKU page and VEVOR 15–22 kg SKU page. Availability comes from the corresponding Dekuch selections. Images are from matching product media.