5–8 Inch Bench Vise Guide: Jaw Width, Opening & Swivel

Choose a bench vise by jaw opening, throat depth and positioning needs—not the jaw-width number alone. A 6.5-inch jaw does not necessarily open 6.5 inches. Dekuch's current VEVOR selections include different body formats and opening arrangements, so an inch label is only the beginning of the comparison.
Use the table to narrow your options, then verify the selected SKU, current instructions and mounting dimensions. All four variants had stock when reviewed on October 30, 2026; availability can change.
Compare the four current configurations
| Selection | 5 in | 5.5 in | 6.5 in | 8 in |
|---|---|---|---|---|
| SKU | DXZSDGNTQ5INLZ20LV0 | DXZSDGNTQ55IFO0S7V0 | SXZSDGNTQ65IZY3ZOV0 | DXZSDGNTQ8INTFIJJV0 |
| Listed jaw width | 127 mm | 140 mm | 165 mm | 203 mm |
| Listed maximum opening | 125 mm | 140 mm forward / 180 mm reverse | 125 mm | 203 mm forward / 292 mm reverse |
| Listed throat depth | 71 mm | 73 mm | 75 mm | 94 mm |
| Rotation check | See clarification below | 360° base | 360° head and base | 360° base |
| Listed net weight | 7.95 kg | 9.3 kg | 17.65 kg | 20.1 kg |
These are model-specific supplier figures, not independent measurements. Nominal inch labels and metric listings may use rounding. Confirm critical clearances with actual dimensions.
Jaw width, opening and throat depth answer different questions
Jaw width describes the span of the jaw face. Opening describes the separation available between the jaws. Throat depth describes the reach below the top of the jaws toward the body. Compare all three with the part you actually intend to hold.
The 5-inch and 6.5-inch selections both list a 125 mm maximum opening. The wider jaw face on the latter therefore does not establish a wider gap. If you are replacing a vise because a part will not fit, measure the required gap rather than simply ordering the next jaw-width size.

Reversible opening and a rotating head are separate features
The 5.5-inch and 8-inch listings give forward and reverse opening values. Those values describe different jaw arrangements, not an instruction to keep winding the screw beyond its normal configuration. Follow the exact model instructions when changing an arrangement.
The 6.5-inch model separately lists head and base rotation. That can matter when the desired part orientation changes. Plan the swept space around the tool, including the part, handle and nearby bench equipment; rotation alone does not prove that your layout has enough clearance.

Clarify the 5-inch swivel description before ordering
The 5-inch option is labeled “Dual Swivel (360° Head & Base)” in the product selector, while its specification text emphasizes the rotating base. That inconsistency is unresolved here. If independent head rotation is essential, ask for confirmation for SKU DXZSDGNTQ5INLZ20LV0 and the current manual before purchase. Do not infer the mechanism from the shared product title.

Check the bench as carefully as the vise
A tool that fits on the tabletop may still interfere with drawers, a wall or the edge of the bench. Make a layout sketch and verify the base hole pattern, fastener access and handle sweep. Overall product length does not establish mounting-hole spacing.
Check the bench and mounting requirements against the intended work and the current model instructions. The tool's own weight is only one part of the installation. This guide does not provide a mounting load rating, bolt specification or universal installation approval.
Choose by the problem you need to solve
- A part needs more jaw separation: compare the opening row and the permitted configuration.
- A part sits too high in the jaws: compare throat depth and the actual part geometry.
- You need another orientation: confirm which component rotates on the exact SKU.
- Bench space is limited: verify the mounting layout and swept clearance before checkout.
View 5-inch selection → · View 5.5-inch selection →
View 6.5-inch selection → · View 8-inch selection →
Frequently asked questions
Will a 6.5-inch vise hold a 6.5-inch-thick part?
Its jaw-width name does not establish that. Check the listed maximum opening and the actual part's shape.
Does a 360° base mean the head also rotates?
No. Verify head and base movement separately; the 5-inch labeling needs clarification.
Can I use the reverse opening figure in the normal arrangement?
Do not assume that. The supplier distinguishes configurations; follow the exact model instructions.
Are the pictured bolts and jaw pads guaranteed for every variant?
This guide does not establish a complete package list for every option. Confirm the selected SKU contents before relying on accessories.
Workbench size guide · Milling vise comparison · All VEVOR buying guides
Reviewed against the corresponding Dekuch SKU data and VEVOR supplier pages: 5-inch, 5.5-inch, 6.5-inch and 8-inch. Photos come from matching SKU media. No clamping-force comparison is made because published figures are not consistently stated.