12-Inch Wall Exhaust Fan Guide: Size, Airflow & Supply

Black VEVOR 12-inch wall-mount exhaust fan buying guide

Check the electrical rating and mounting dimensions before choosing this fan by its 12-inch label. Dekuch's selection is SKU PQFJYNF-300-2T001V7. The matching supplier page lists 220V and 50Hz. Confirm the rating on the actual unit and its suitability for your supply before purchase; a US storefront or a power figure alone does not establish compatibility.

This guide is a selection checklist. It does not provide wiring instructions or approve a particular installation.

What the matching supplier page lists

Check Supplier listing for this SKU
Model / SKU YNF-300-2T / PQFJYNF-300-2T001V7
Nominal size / opening diameter 12 in / 300 mm
Panel size 350 × 350 mm
Power 107 W
Electrical supply 220V, 50Hz — verify actual nameplate
Air volume 2850 m³/h
Noise 68–73 dB; test conditions not established here

Reviewed November 1, 2026. These are supplier figures, not independent measurements or an installation drawing. Confirm current specifications for the unit being supplied.

Separate the size label from the installation drawing

Identify three things on your layout: the space through the wall, the area covered by the panel, and the fixing locations. A nominal fan size cannot answer all three. Request the current dimensional drawing and check wall thickness, rear clearance and access for maintenance before making an opening.

Black square-panel VEVOR wall exhaust fan with front wire guard
Product view. Use a dimensional drawing rather than a photograph to plan an opening.

If you are replacing an existing fan, record the existing opening and mounting pattern independently. Compare them with the new unit's drawing. Do not assume two products with the same inch label will share the same holes or panel footprint.

Resolve the electrical question before checkout

The supplier's rating deserves a separate check, especially when buying for a different market. Ask for a current nameplate photograph and manual for the exact SKU. Have the available supply and installation requirements checked by a qualified electrician. This guide does not establish operation on 120V/60Hz, or approve an adapter, transformer or frequency workaround.

If the nameplate, manual and sales page disagree, obtain clarification for the actual unit before proceeding. Treat that as a compatibility question to resolve, rather than assuming the website location determines the electrical version.

Read airflow as one specification, not a room-size promise

A volume-per-hour number does not by itself establish suitability for a particular workshop or room. Write down the proposed air path, inlet and outlet arrangement, and any duct, grille or other restriction. Ask for performance information relevant to that arrangement before treating the headline figure as delivered airflow.

Supplier detail image of the exhaust fan metal frame and protective grille
Frame and grille detail from the matching product media.

When comparing alternatives, compare figures with matching test conditions where available. This page does not establish an air-change target, a maximum floor area or the suitability of this model for a particular process.

Check noise and the intended environment

A sound figure needs context: measurement distance, surroundings and operating conditions all belong in a meaningful comparison. Ask for those details if noise is a deciding factor. Do not turn a qualitative “quiet” description into a promise about the sound in your room.

Supplier image of the five-blade fan assembly
Blade assembly illustration. It is not an instruction to remove the guard.

Describe your actual environment to the supplier and installer. A broad commercial-use description does not establish suitability for grease-laden exhaust, flammable vapors, wet locations or a regulated ventilation duty. Confirm the required ratings and application approval for the job.

Before you order

  1. Identify the exact unit: match the SKU, current manual and nameplate.
  2. Confirm supply: resolve voltage and frequency compatibility.
  3. Confirm fit: obtain the drawing and verify the opening, panel and fixings.
  4. Confirm performance: check airflow and noise information for the planned arrangement.
  5. Confirm contents: ask which mounting parts, controls and electrical accessories are supplied.

Dekuch showed stock at review. Check the selected option for current price and availability.

View the 12-inch fan and confirm this SKU →

Frequently asked questions

Does “12 inch” define every installation measurement?

No. Verify the complete dimensional drawing and fixing pattern for the exact model.

Can I assume it plugs into a standard US outlet?

No. The matching supplier specification needs to be reconciled with the actual nameplate and your available supply.

Does the airflow figure prove it will ventilate my room?

No. Suitability needs the intended air path, restrictions and ventilation requirements to be assessed.

Are a plug, controller and mounting hardware included?

A complete accessory list was not established in this review. Confirm the current package contents before ordering.

Browse all VEVOR buying guides →

Specification source: VEVOR page for SKU PQFJYNF-300-2T001V7. Product images are from matching Dekuch media. No hands-on performance test is claimed.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.