100-Inch Projector Screen: Manual vs Electric & Room Fit

A screen can have the right diagonal and still be wrong for the wall. For a home movie room or meeting space, start with the housing width, control access and installation plan. Then compare manual and electric lifting.

VEVOR 100-inch manual and electric projector screen comparison
Correct 100-inch SKU photographs. Images are not to a common scale; projected scenes illustrate the supplier's presentation.

Quick choice: how will you raise and lower it?

Choose the manual TL-100S-A if you can comfortably reach the pull handle and prefer a screen mechanism that does not need motor power. Consider the electric TLES100 if seated control is important and you can provide the correct electrical supply. The electric model is not a drop-in replacement: its listed overall width is greater.

Ask about the 100-inch manual screen · Ask about electric configuration availability. These configurations are currently not published for online purchase at Dekuch. Ask support to confirm availability before planning an order.

Compare these two exact configurations

Check Manual lifting Electric lifting
SKU TYPM20SDSJ106BD6YV0 TYPM20DDSJ1234UJGV1
Model TL-100S-A TLES100
Nominal diagonal / format 100 in / 16:9 100 in / 16:9
Control Pull handle; automatic locking Wired and wireless controls described by manufacturer
Overall product dimensions 91.73 × 3.15 × 66.14 in 97.04 × 3.15 × 63.78 in
Listed fabric dimensions 89.37 × 62.6 in 89.37 × 59.84 in
Listed product weight 17.64 lb / 8 kg 16.84 lb / 7.64 kg
Screen material PVC PVC

The fabric measurements above describe the supplier-listed material dimensions, not a verified white viewing rectangle. They should not be used as the projector's image-size setting. Request the drawing showing the active viewing area, borders and mounting points for your exact model.

Measure the wall before choosing the lifting method

Mark the available horizontal space between cabinets, curtains and other obstructions. Compare it with the housing dimensions, then allow the clearance required by the installation instructions. The electric model's listed width is 5.31 inches greater than the manual model's; this is a comparison of the listed overall dimensions, not a mounting-hole spacing.

Next, decide where the bottom of the picture should sit when people are seated. Check that furniture will not obstruct the hanging fabric or the manual pull handle. Do not treat the screen's full drop height as a recommended picture height for every room.

VEVOR TL-100S-A 100-inch manual screen with pull handle
Manual TL-100S-A: check reach to the pull handle and the mounting layout.

Plan controls and power together

For a manual model, think through who will operate it and whether reaching the handle is convenient after the room is furnished. For an electric model, check outlet position, cable routing, rated voltage and the control arrangement before ordering. Do not assume smart-home, app or projector-trigger compatibility; those functions are not established by the current specifications.

VEVOR TLES100 100-inch electric screen and controls in supplier photograph
Electric TLES100 supplier photograph. Confirm the itemized box contents and electrical rating for the shipped unit.

What the screen does—and what the projector must do

This is a projection surface, not a display with its own pixels or light source. Resolution labels in the supplier photographs do not mean that the screen creates a 4K image. Check your projector's resolution, lens and placement requirements separately. Before drilling, test your planned picture size and seating positions in the actual room.

Control room light as part of that test. Do not assume ambient-light rejection, ultra-short-throw suitability or a specific gain: those properties are not verified here. A larger diagonal alone does not establish that a projector can fill the screen from your intended location.

Supplier illustration of the 100-inch manual screen in a viewing room
Supplier room illustration; seating, projector and furnishings are not an included equipment list.

Installation and ordering checklist

  • Match the option and SKU, rather than relying on the product URL's legacy wording.
  • Confirm the active viewing area, housing width and mounting-point spacing.
  • Check the supporting wall or ceiling and specify anchors appropriate to that structure. Follow the model manual; preassembly does not remove the need for secure installation.
  • Request a complete package list. Current Dekuch specification rows do not establish all supplied fasteners or control accessories.
  • Plan indoor use. Manufacturer Q&A says the manual version is not sun- or rain-proof and the electric version is not waterproof.
  • Confirm listing availability and delivery eligibility with support. This guide does not mean either selection is currently orderable.

Frequently asked questions

Are the manual and electric screens the same width?

No. Listed overall widths are 91.73 inches for TL-100S-A and 97.04 inches for TLES100. Check the mounting drawing rather than using these widths as hole spacing.

Does “100 inch” describe the housing length?

No. It is the nominal screen diagonal. Housing, fabric and active picture dimensions are separate measurements.

Does electric lifting improve image resolution?

The lifting method changes how the screen moves. Image resolution depends on the projector and source; electric lifting alone is not evidence of a sharper picture.

Can I leave it outdoors?

Do not plan permanent outdoor installation for these selections. Follow the manufacturer's indoor-use and moisture limitations.

Choose after measuring

Contact Dekuch about 100-inch screen availability. Send your required housing clearance and control preference when asking about model fit.

Planning the rest of your room? See our backdrop stand size guide for a separate support-system comparison, or browse the VEVOR buying-guide hub.

Specification sources

VEVOR manual TL-100S-A / SKU source · VEVOR electric TLES100 / SKU source. Specifications checked October 25, 2026.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.