Vehicle Loading Ramp Size Guide: 60 vs 72 vs 78 vs 84 Inch
VEVOR Guide
Vehicle Loading Ramp Size Guide: 60 vs 72 vs 78 vs 84 Inch
Loading-ramp length and width affect approach angle, tire placement, handling, and how easy it is to move an ATV, motorcycle, mower, or other compatible equipment onto a truck bed or trailer. This guide compares VEVOR aluminum ramp pairs in 60, 72, 78, and 84 inch lengths.
Quick answer
For the same loading height, a longer ramp creates a shallower approach angle. Choose 60 inches when compact storage matters and the loading height is relatively low. Choose 72–78 inches for a middle ground. Choose 84 inches when you want the gentlest approach among these options and have enough storage space.
Available VEVOR ramp sizes
| Size | Width per ramp | Best fit | Current inventory |
|---|---|---|---|
| 60 × 12 × 2.5 in | 12 in | Lower loading heights, compact storage | 716 |
| 72 × 15 × 4 in | 15 in | Wider tire support and moderate ramp length | 29 |
| 78 × 12 × 2 in | 12 in | Longer approach without moving to 84 in | 117 |
| 84 × 14 × 2.5 in | 14 in | Higher loading points and shallower approach | 613 |
Why ramp length matters
If the truck bed or trailer deck is at a fixed height, increasing ramp length reduces the incline. A shallower angle can make loading easier for equipment with lower ground clearance, longer wheelbases, or limited breakover clearance.
That does not mean the longest ramp is always best: longer ramps require more storage space and more room behind the vehicle or trailer during use.
Why ramp width matters
Each ramp supports one side of the vehicle or equipment. Wider ramp surfaces give more lateral margin for tire placement. The 72-inch option is listed at 15 inches wide, the 84-inch option at 14 inches, and the 60- and 78-inch versions at 12 inches.
Measure your tire width and track spacing before ordering, and make sure both ramps can be positioned to match the vehicle safely.
How to choose the right ramp length
- Measure the vertical loading height from the ground to the trailer or truck bed.
- Check the vehicle's ground clearance and wheelbase.
- Choose a longer ramp when you need a shallower approach angle.
- Confirm you have enough space behind the vehicle for the full ramp length.
- Measure tire width and track width so each wheel stays centered on its ramp.
- Verify the exact load rating for the selected SKU before use.
60 vs 72 vs 78 vs 84 inch: practical use
- 60 in: easiest to store and carry; best when the loading height is lower.
- 72 in: adds length and the widest listed ramp surface in this family.
- 78 in: useful when you want a longer approach but still prefer a 12-inch-wide ramp.
- 84 in: longest option here, giving the shallowest approach for the same deck height.
Load capacity: verify the exact SKU
The product family includes multiple size and load-capacity configurations, but the current merged product page does not list a complete load-rating value next to every size variant. Do not assume all four sizes share the same rating. Verify the exact SKU's rated capacity before loading any motorcycle, ATV, UTV, mower, or other equipment.
Compare VEVOR Aluminum Loading Ramps on Dekuch
FAQ
Are longer loading ramps safer?
Longer ramps create a shallower approach angle at the same loading height, but safe use still depends on load rating, setup, traction, securing method, and correct wheel placement.
What ramp width should I choose?
Choose a ramp wide enough for the tire with lateral margin. Measure tire width and keep the tire centered on the ramp during loading.
Can I choose by vehicle weight alone?
No. You also need to consider ramp rating, axle load distribution, loading height, ground clearance, tire width, and the exact manufacturer's instructions for the selected SKU.