5 Ton vs 6 Ton Air Jack: VEVOR Capacity & Lift Range Guide
The 5 ton and 6 ton VEVOR pneumatic air jacks look similar, but the useful differences are more than one extra ton of rated capacity. The 6 ton model also has a taller listed lifting range and a higher minimum body height, while the 5 ton model sits lower and weighs less. Both use the same listed working-pressure range and both require an external air compressor.
5 ton or 6 ton air jack — which one should you choose?
Choose by the vehicle’s required lifting capacity and the jack’s height range—not by tonnage alone. The 5 ton model has a lower listed minimum body height of 5.5 in / 140 mm and a booster-column lifting range of 9.1–21.8 in / 230–554 mm. The 6 ton model starts higher at 6.7 in / 170 mm and lists a booster-column range of 10.2–26.5 in / 260–673 mm.
Compare the 5 Ton and 6 Ton Air Jacks →Key Takeaways
5.5 in minimum body height without the booster column.
Up to 26.5 in with the booster column, versus 21.8 in on the 5 ton model.
Both configurations list 0.8–1.0 MPa working pressure.
These are pneumatic jacks and require an external compressed-air source.
VEVOR 5 Ton vs 6 Ton Pneumatic Air Jack
| Specification | 5 Ton | 6 Ton |
|---|---|---|
| Rated capacity | 5 ton / 11,000 lb | 6 ton / 13,000 lb |
| Working pressure | 0.8–1.0 MPa | 0.8–1.0 MPa |
| Minimum height without booster | 5.5 in / 140 mm | 6.7 in / 170 mm |
| Lift range with booster column | 9.1–21.8 in / 230–554 mm | 10.2–26.5 in / 260–673 mm |
| Listed product dimensions | 48.0 x 12.8 x 5.5–18.3 in | 48.0 x 12.8 x 6.7–22.9 in |
| Net weight | 50.9 lb / 23 kg | 57.2 lb / 25.7 kg |
Why Minimum Height and Maximum Lift Matter
Capacity tells you how much load the jack is rated to lift, but physical fit determines whether it can reach the approved lift point. The 5 ton model’s lower 5.5 in minimum body height can matter when clearance is limited. The 6 ton model gives more listed height at the top end, reaching 26.5 in with the booster column.
Before choosing, compare the jack’s minimum and maximum usable heights with the vehicle manufacturer’s approved lifting points and the actual ground clearance of the vehicle.
Air Supply Requirements
Both configurations list a working-pressure range of 0.8–1.0 MPa and require an external air compressor. The inlet valve is listed as G1/4 in the product details. Confirm that the compressor, regulator, hose and fittings are suitable for the jack and that pressure stays within the product specification.
How to Choose Between the 5 Ton and 6 Ton Models
01 · Check the required rated capacity
Use the vehicle and service information to determine the required lifting capacity. Do not select a jack with insufficient rated capacity.
02 · Check minimum clearance
The 5 ton model starts lower at 5.5 in without the booster column; the 6 ton model starts at 6.7 in.
03 · Check required lift height
The 6 ton model provides the taller listed booster-column range, while the 5 ton model has a lower starting point.
04 · Confirm your compressed-air setup
Both versions specify 0.8–1.0 MPa working pressure, so the air supply must be compatible.
05 · Compare portability
The 5 ton version is listed at 50.9 lb, while the 6 ton version is 57.2 lb including accessories.
Vehicle Lifting Safety
- Follow the vehicle manufacturer’s designated lifting points and the jack manual.
- Use the jack only on a stable, suitable surface and within its rated capacity and pressure range.
- Never work under a vehicle supported only by a jack. Use appropriately rated support stands or other approved support equipment before going underneath.
- Keep hands, feet and body parts clear while the vehicle is being raised or lowered.
- Stop using the jack if the airbag, hose, fittings, valve, pad, wheels or structural parts show damage or abnormal leakage.
Quick Selection Checklist
- I confirmed the required lifting capacity.
- I checked the approved vehicle lift point and available clearance.
- I compared the 5.5 vs 6.7 in minimum body heights.
- I checked the required upper lift height.
- I confirmed a compatible 0.8–1.0 MPa compressed-air supply.
- I have appropriately rated support equipment for any work beneath a raised vehicle.
VEVOR 5 Ton & 6 Ton Pneumatic Air Jacks
Compare rated capacity, minimum height, booster-column lift range, weight and current stock before ordering.
View Both Air Jack Options →Frequently Asked Questions
What is the main difference between the 5 ton and 6 ton air jacks?
The 6 ton model has a higher rated capacity and taller listed lift range. The 5 ton model has a lower minimum body height and lower listed weight.
Do these pneumatic jacks require an air compressor?
Yes. Both product configurations require an external air compressor and list a working-pressure range of 0.8–1.0 MPa.
Which model has the lower minimum height?
The 5 ton model is listed at 5.5 in / 140 mm minimum height without the booster column, compared with 6.7 in / 170 mm for the 6 ton model.
Can I work under a vehicle while it is supported by the air jack?
Do not work underneath a vehicle supported only by a jack. Use appropriately rated support stands or other approved support equipment and follow the vehicle and jack instructions.
Vehicle lifting is safety-critical. Confirm vehicle lift points, required capacity, compressed-air compatibility and support procedures before use.